T-Rex 450 PRO V3 Cod: KX015074
T-Rex 450 PRO V3
CARDANO
|
Dati Tecnici - Technical Data
Kit di montaggio con pale in carbonio, NEW motor 450M (lucido) Regolatore 35A governor.
Trasmissione cardano.
Gyro Align GP780
Servo di coda Align DS520
3 servi ciclico Align DS410
| Compreso nel kit:
Pale in carbonio
3 servi align DS410
servo di coda align DS520
Gyro align GP780
Features
Newly designed head block with high rigidity and stability.
Single piece integrated design of main bearing block and servo mount.
Single piece integrated design of anti-rotation guide and gyro mount.
Single piece integrated landing gear.
Highly stable flybar control system.
High precision bearing mixing arms.
Newly designed high resolution swashplate.
Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane.
Highly rigid frame with single piece carbon side and bottom plates.
Highly efficient shaft driven tail design.
Weighted tail rotor blade grips to repel centripetal forces.
Straight-up in-frame rudder servo mount for improved geometry.
Newly designed aerodynamic canopy.
Newly designed high torque motor.
Newly designed high strength main blade grips.
*GP780 indicate status LED and setting
Length: 635mm
Height: 230mm
Main Rotor Diameter: 710mm
Tail Rotor Diameter: 158mm
Motor Drive Gear: 13T
Main Drive Gear: 150T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:11.5:4.24
Weight(w/o power system): 450g
Flying Weight: Approx. 780g
Color carton:27.3x10x6.6cm
Outer carton:56x31x28cm ,24sets/ctn
Accessories:
T-REX 450 PRO Kit Set X1 set
325 Carbon blades X1set
RCE-BL35X 35A Brushless ESC X1
450M Brushless motor(3500KV) X1
DS410M (Metal Gear)Digital servoX3
GP780 Head lock gyroX1
DS520 Digital servoX1
Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gaugeX1
4.11.1V 3S Li-Po 2000~2200mAh batteryX1
!
<<
|
|
